TY - GEN
T1 - Development of a small autonomous flying robot with four-rotor system
AU - Yoon, K. J.
AU - Goo, N. S.
PY - 2011
Y1 - 2011
N2 - We discuss the development of a mini-quadrotor system for indoor application at Konkuk University. The propulsion system consists of X-UFO blade propellers and brushless direct current (DC) motors assembled on a very stiff airframe made of carbon fiber composite material. The attitude control system consists of a stability augmentation system as the inner loop control and a modern control approach as the outer loop. The closed-loop control is a PID controller, which is used for the flight test to validate our aerodynamic modeling. To perform an experimental flight test, basic electronics hardware is developed in a simple configuration. We used an AVR microcontroller as the embedded controller, a low-cost 100 Hz AHRS for inertial sensing, infrared (IR) sensors for horizontal ranging, and an ultrasonic sensor for ground ranging. A high performance propeller system is built on an X-UFO quadrotor airframe. The developed flying robot is shown to have an automatic hovering ability with aid of a ground control system that uses monitoring and a fail-safe system.
AB - We discuss the development of a mini-quadrotor system for indoor application at Konkuk University. The propulsion system consists of X-UFO blade propellers and brushless direct current (DC) motors assembled on a very stiff airframe made of carbon fiber composite material. The attitude control system consists of a stability augmentation system as the inner loop control and a modern control approach as the outer loop. The closed-loop control is a PID controller, which is used for the flight test to validate our aerodynamic modeling. To perform an experimental flight test, basic electronics hardware is developed in a simple configuration. We used an AVR microcontroller as the embedded controller, a low-cost 100 Hz AHRS for inertial sensing, infrared (IR) sensors for horizontal ranging, and an ultrasonic sensor for ground ranging. A high performance propeller system is built on an X-UFO quadrotor airframe. The developed flying robot is shown to have an automatic hovering ability with aid of a ground control system that uses monitoring and a fail-safe system.
UR - https://www.scopus.com/pages/publications/84255194293
U2 - 10.1109/ICAR.2011.6088562
DO - 10.1109/ICAR.2011.6088562
M3 - Conference contribution
AN - SCOPUS:84255194293
SN - 9781457711589
T3 - IEEE 15th International Conference on Advanced Robotics: New Boundaries for Robotics, ICAR 2011
SP - 150
EP - 154
BT - IEEE 15th International Conference on Advanced Robotics
T2 - IEEE 15th International Conference on Advanced Robotics: New Boundaries for Robotics, ICAR 2011
Y2 - 20 June 2011 through 23 June 2011
ER -