TY - GEN
T1 - Effect of fine particles on cement treated sand
AU - Vinoth, Ganapathiraman
AU - Moon, Sung Woo
AU - Kim, Jong
AU - Ku, Taeseo
N1 - Publisher Copyright:
© 2018, Springer Nature Switzerland AG.
PY - 2018
Y1 - 2018
N2 - Cement treated sand improves mechanical properties through the cementitious bonding between cohesionless particles, thus allowing several geotechnical applications such as soil stabilization against slope failure and liquefaction. Since pure sand without any fine particles is seldom available in nature, this study aims to investigate the effect of fine particles (kaolin) in a very small proportion (<5%) on cement treated sand. Two types of cements are used: (i) Ordinary Portland cement (OPC) and (ii) Calcium sulfoaluminate cement (CSA). OPC is the widely used cementitious binder whereas CSA is a rapid hardening cement that is becoming popular due to its low carbon foot print. Three different cement contents (3%, 5% and 7%) and four different fine contents (0%, 1%, 3% and 5%) for each cement content are chosen. The stiffness and strength of the cement treated sands are measured through shear wave velocity and unconfined compressive strength respectively, after 1-day and 7-day curing periods. The results show that the influence of fine particles is visible even with fine content as low as 1%. However, the effect is different between the two types of cements used and between low and high cement contents. As the fine content increases, the increase in strength and stiffness is more for OPC than CSA and more significant at low cement content (3%) than high cement content (5% and 7%).
AB - Cement treated sand improves mechanical properties through the cementitious bonding between cohesionless particles, thus allowing several geotechnical applications such as soil stabilization against slope failure and liquefaction. Since pure sand without any fine particles is seldom available in nature, this study aims to investigate the effect of fine particles (kaolin) in a very small proportion (<5%) on cement treated sand. Two types of cements are used: (i) Ordinary Portland cement (OPC) and (ii) Calcium sulfoaluminate cement (CSA). OPC is the widely used cementitious binder whereas CSA is a rapid hardening cement that is becoming popular due to its low carbon foot print. Three different cement contents (3%, 5% and 7%) and four different fine contents (0%, 1%, 3% and 5%) for each cement content are chosen. The stiffness and strength of the cement treated sands are measured through shear wave velocity and unconfined compressive strength respectively, after 1-day and 7-day curing periods. The results show that the influence of fine particles is visible even with fine content as low as 1%. However, the effect is different between the two types of cements used and between low and high cement contents. As the fine content increases, the increase in strength and stiffness is more for OPC than CSA and more significant at low cement content (3%) than high cement content (5% and 7%).
KW - Calcium sulfoaluminate
KW - Cemented sand
KW - Fine particles
KW - Shear wave velocity
KW - Unconfined compressive strength
UR - https://www.scopus.com/pages/publications/85060438706
U2 - 10.1007/978-3-319-97112-4_190
DO - 10.1007/978-3-319-97112-4_190
M3 - Conference contribution
AN - SCOPUS:85060438706
SN - 9783319971117
T3 - Springer Series in Geomechanics and Geoengineering
SP - 847
EP - 851
BT - Springer Series in Geomechanics and Geoengineering
A2 - Wu, Wei
A2 - Yu, Hai-Sui
PB - Springer Verlag
T2 - China-Europe Conference on Geotechnical Engineering, 2016
Y2 - 13 August 2016 through 16 August 2016
ER -