Skip to main navigation Skip to search Skip to main content

Effective removal of humic acid using xanthan gum incorporated polyethersulfone membranes

  • National Institute of Technology Tiruchirappalli
  • Konkuk University

Research output: Contribution to journal › Article › peer-review

38 Scopus citations

Abstract

In this study, xanthan gum (XA) was used as a hydrophilic biopolymer additive for the modification of polyethersulfone (PES) membrane to removal of humic acid (HA). The membranes are prepared using phase inversion technique and the concentration of XA was varied from 0.5 to 1.5wt%. The prepared membranes are characterized as a function of hydrophilicity, equilibrium water content (EWC), porosity studies and functional group analysis. Membrane surface and cross-sectional morphology was studied using scanning electron microscope. The lower contact angle value 64.2° was exhibited, when 1.5wt% of XA incorporated in PES membrane and this ensures that increase of hydrophilicity in pristine PES membrane. Further, higher water permeability (PWP) of 68.9-9m/skPa was observed for 1.5wt% of XA/PES membrane. The effect of pH on HA removal was studied for neat PES and XA/PES membranes. The rejection performance of XA incorporated in PES membranes were compared with commercial available PES membrane.

Original languageEnglish
Pages (from-to)223-228
Number of pages6
JournalEcotoxicology and Environmental Safety
Volume121
DOIs
StatePublished - 1 Nov 2015

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 3 - Good Health and Well-being
    SDG 3 Good Health and Well-being

Keywords

  • Flux recovery ratio
  • Hydrophilicity
  • Removal of humic acid
  • Xanthan gum

Fingerprint

Dive into the research topics of 'Effective removal of humic acid using xanthan gum incorporated polyethersulfone membranes'. Together they form a unique fingerprint.

Cite this