Skip to main navigation Skip to search Skip to main content

Influence of the mixture of gasoline and diesel fuels on droplet atomization, combustion, and exhaust emission characteristics in a compression ignition engine

  • Korea Institute of Energy Technology Evaluation and Planning
  • National Institute of Environmental Research
  • Hanyang University

Research output: Contribution to journal › Article › peer-review

113 Scopus citations

Abstract

The purpose of this study was to investigate the fuel properties, droplet atomization, combustion performance, and exhaust emission characteristics of gasoline-diesel direct blended fuels in a four-cylinder diesel engine. The gasoline fuel was blended as a volumetric fraction of conventional diesel fuel. The droplet size of test fuels was measured using a phase Doppler particle analyzer (PDPA), and the combustion and emission characteristics were investigated for a four-cylinder diesel engine with a common-rail injection system and emission analyzer. In this study we found that increasing the gasoline volume fraction decreased the fuel density, kinematic viscosity, and surface tension. The temperature for 10% distillation (T10) decreased as the gasoline fraction increased. The blending of gasoline caused a decrease in droplet size by increasing the small droplets and decreasing the large droplets because the surface tension decreased with the addition gasoline fuel, thereby inducing an increase in droplet instability. On the other hand, gasoline blending resulted in an extension of the ignition delay and the formation of a more homogeneous mixture. These combustion characteristics caused the simultaneous reduction of ISNOx and ISsoot. However, the ISHC and ISCO emissions were slightly increased. The difference in ISHC and ISCO emissions between pure diesel and gasoline blended diesel fuels decreased as the engine load increased. An increase in engine load diminished the effects of gasoline blending on combustion performance and exhaust emissions.

Original languageEnglish
Pages (from-to)392-401
Number of pages10
JournalFuel Processing Technology
Volume106
DOIs
StatePublished - Feb 2013

Keywords

  • Atomization characteristics
  • Emission reduction
  • Engine operating conditions
  • Gasoline blended fuel
  • Ignition delay
  • Sauter mean diameter (SMD)

Fingerprint

Dive into the research topics of 'Influence of the mixture of gasoline and diesel fuels on droplet atomization, combustion, and exhaust emission characteristics in a compression ignition engine'. Together they form a unique fingerprint.

Cite this