Skip to main navigation Skip to search Skip to main content

Simultaneous control of mechanical strength and hierarchical structure in freeze-casted porous alumina by two-step sintering

  • Sang Chae Jeon
  • , Jong Won Woo
  • , Sung Hyun Kim
  • , Jang Hoon Ha
  • , Dong Yeol Yang
  • , Kyoung Seok Moon
  • , Haoyue Wu
  • , Jae Hwan Yang
  • , Dong Kyu Kim
  • Changwon National University
  • Korea Institute of Materials Science
  • Gyeongsang National University
  • Konkuk University
  • Chungnam National University

Research output: Contribution to journal › Article › peer-review

6 Scopus citations

Abstract

To increase mechanical strength of porous ceramics, here, an effective two-step sintering (TSS) technique capable of producing highly porous alumina with enhanced mechanical strength is suggested. Based on the sintering theories, here, a significantly lower activation energy for densification at low temperature region allowed a beneficial temperature range for the TSS to be deduced. With a specific TSS regime (T1 = 1550°C and T2 = 1400°C), significantly higher compressive strength levels (8.00–15.24 MPa) were measured with an apparent porosity of 56.49% compared to conventional sintering (1.03–1.86 MPa) with similar apparent porosity of 57.84%. Specifically, another TSS regime (T1 = 1550°C and T2 = 1380°C) left submicron-sized open pores within the lamellar walls, providing a hierarchical porous structure with enhanced mechanical strength. An evaluation of the mechanical stability by a finite element analysis indicated outstanding compressive strength even with small pores in the lamella walls.

Original languageEnglish
Pages (from-to)76-91
Number of pages16
JournalJournal of the American Ceramic Society
Volume107
Issue number1
DOIs
StatePublished - Jan 2024

Keywords

  • densification
  • freeze-casting
  • hierarchy
  • porous ceramics
  • two-step sintering

Fingerprint

Dive into the research topics of 'Simultaneous control of mechanical strength and hierarchical structure in freeze-casted porous alumina by two-step sintering'. Together they form a unique fingerprint.

Cite this