Skip to main navigation Skip to search Skip to main content

Study on blade property measurement and its influence on air/structural loads

  • Sung N. Jung
  • , Young H. You
  • , Manoj K. Dhadwal
  • , Johannes Riemenschneider
  • , Brandon P. Hagerty
  • Konkuk University
  • German Aerospace Center
  • NASA Ames Research Center

Research output: Contribution to journal › Article › peer-review

16 Scopus citations

Abstract

In this study, the structural properties of Second Higher-Harmonic Aeroacoustic Rotor Test blades are determined using state-of-the-art test techniques. The measurement includes bending and torsion stiffnesses, section geometric offsets, and mass and inertia properties. Several Second Higher-Harmonic Aeroacoustic Rotor Test blades, including the original instrumented blade used for the wind-tunnel test campaign in 2001, as stated by Yu et al. (The HART-II Test: Rotor Wakes and Aeroacoustics with Higher-Harmonic Pitch Control (HHC) Inputs-The Joint German/French/Dutch/US Project, Proceedings of the 58th American Helicopter Society (AHS) Annual Forum, American Helicopter Soc., Montreal, June 2002) are used for the activity.Afinite element-based cross-section analysis combined with an X-ray computer tomography technique is employed for the cases where no mechanical measurement is available or attempted. The resulting structural properties are correlated against the earlier estimated values, which have extensively been used in the literature for the validation of the Second Higher-Harmonic Aeroacoustic Rotor Test rotor. A substantial deviation is observed between the present measurement and the earlier property result. The comprehensive rotor dynamics analysis is performed to quantify the impact of the measured blade properties on the aeromechanics behavior of the rotor. The location of the center of gravity is demonstrated to be the most influential factor affecting the deviation and the sensitivity of the aeroelastic response of the rotor.

Original languageEnglish
Pages (from-to)3221-3232
Number of pages12
JournalAIAA Journal
Volume52
Issue number11
DOIs
StatePublished - 2015

Fingerprint

Dive into the research topics of 'Study on blade property measurement and its influence on air/structural loads'. Together they form a unique fingerprint.

Cite this